East Coast Boat Lifts Logo
East Coast Boat Lifts • P O Box 473, 510 Lord Mott Road, Urbanna, VA 23175 • 800-718-5737



Return to
• HOME PAGE •



• PRODUCTS •
Low Profile Lift
Low Profile E-Drive

Overhead Beam Lift
Overhead Beam
O.B. with E-Drive
O.B. Aluminum

Jet Ski & PWC Lifts
800 lb Boat Lift
1,500 lb Boat Lift
2,500 lb Boat Lift

Boathouse Lift

Eight Piling Lifts
Large Capacity Lifts

Custom Lifts

Dock Ladders
Remote Controls

Spare Parts
Accessories
Drive Systems
Electrical
Hardware
Lift Parts
PWC Parts

   


• CONTACT US •
Dealer Inquiry
Boat Owner Inquiry
After Sales Support
Warranty



Low Profile Boat Lifts

The low profile boat lift was designed to eliminate the upper or overhead beams and allow for easy access on and off your boat, which are only inches away from your pier. Drive units are mounted on the pier side for easier service, and there is no underwater wiring. The two electric motor lift systems allows for easy leveling of boat, front to back. This is an aesthetically pleasing boat lift.



Specifications

Weight Capacity:
8,000 lbs. to 16,000 lbs.
Piling Diameter Requirement:
8” plus
Piling Height:
36" to 48" above deck
Each Motor:
GFCI protected
Totally enclosed
120v/12.1a or 240v/6a motors available.

Boat Lift Features

  • Hot dipped galvanized steel construction
  • Stainless steel cables
  • Stainless and galvanized hardware
  • E-Drive or Flat Plate Drive systems
  • Enclosed covers
  • Nylon or stainless sheaves
  • Adjustable bunk and guide post systems
  • Standard or custom design

Low Profile Boat Lifts
Low Profile Boat Lifts

Low Profile Boat Lifts

Low Profile Boat Lifts

 

LOW PROFILE SYSTEMS - PILING CONFIGURATION
LOW PROFILE SYSTEMS - PILING CONFIGURATION
Lift
Capacity
Dimension
A - length
Dimension
B - width
Piling
Diameter
8,000 lbs
11'-6"
12'-0"
8" min
10,000 lbs
11'-6"
13'-0"
10" min
12,000 lbs
11'-6"
13'-0"
10" min
16,000 lbs
12'-0"
15'-0"
12" min


OVERHEAD BEAM SYSTEMS - SPECIFICATIONS
Lift
Capacity
Cradles
I-Beams
Drive
Drums
Bear-
ings
Drive
Shaft
Size
Cable
Size
Guide
Post
Height
Motor
Drive
Pulley
Hoist
Drive
Pulley
Hoist
Gear
Ratio
Motors
Travel
Speed
8,000
lbs
4 pilings
2 Each
W6x
12x11'
2 each
8x11.5x27"
channel
4-
1-15/16" 
4-Bolt
Flange
2-3/8"
O.D.
Sch.80
Galv.
Pipe

2 cables
1/4"x30' ss
w/thimble,
2 cables
1/4x50' ss

80"
2"
Diam.
6"
Diam.
96
to 1
2 x 3/4hp
A.O.Smith
120v/12a
240v/6.1a
2.1 ft
per
minute
10,000
lbs
4 pilings
2 Each
W6x
16x13'
2 each
8x11.5x27"
channel
4-
1-15/16" 
4-Bolt
Flange
2-3/8"
O.D.
Sch.80
Galv.
Pipe
2 cables
5/16"x30' ss
w/thimble,
2 cables
5/16x50' ss
80"
2"
Diam.
6"
Diam.
96
to 1
2 x 3/4hp
A.O.Smith
120v/12a
240v/6.1a
2.1 ft
per
minute
12,000
lbs
4 pilings
2 Each
W8x
15x13'
2 each
8x11.5x27"
channel
4-
1-15/16" 
4-Bolt
Flange
2-3/8"
O.D.
Sch.80
Galv.
Pipe
2 cables
5/16"x30' ss
w/thimble,
2 cables
5/16x50' ss
80"
2"
Diam.
8"
Diam.
96
to 1
2 x 1 hp
A.O.Smith
120v/13.6a
240v/6.4a
1.8 ft
per
minute
16,000
lbs
4 pilings
2 Each
W8x
15x15'
2 each
8x15.3x27"
channel
4-
1-15/16" 
4-Bolt
Flange
2-3/8"
O.D.
Sch.80
Galv.
Pipe
2 cables
5/16"x30' ss
w/thimble,
2 cables
5/16x50' ss
80"
2"
Diam.
8"
Diam.
96
to 1
2 x 1 hp
A.O.Smith
120v/13.6a
240v/6.4a
1.8 ft
per
minute
East Coast Boat Lifts • P O Box 473, 510 Lord Mott Road, Urbanna, VA 23175 • 800-718-5737
Comments about this web site?
This web page last updated on: August 24, 2005
Digital Wisdom Services Inc